User's Manual

P. 2
TROUBLE SHOOTING
NO SOUND
- Ensure the in-house power switch ON.
- Ensure the AC/DC adaptor is fully inserted into the AC outlet and the
power connection input on the transmitter.
- Ensure the TV or audio component is ON.
- Press the MUSIC button Ensure to turn on the speaker
- The connected audio / video equipment is not playing. Start playing the
equipment.
- The volume of speaker is too low, adjust the volume to an appropriate
level.
NO LIGHT
- Ensure the in-house power switch ON.
- Ensure the LIGHT switch is set to ON.
- Light bulb is malfunction. Replace with a new the light bulb
DISTORTED
- Press the “AUTO TUNE” button on the speakers until matching the
frequency of the transmitter.
- Change the position of the channel selector on the transmitter. You
must then press the “AUTO TUNE” button on the speakers.
- Battery capacity is too low. Replace with the new battery.
- Ensure the volume level of speakers is adjusted properly.
- The speaker is too far away from the transmitter, move it closer.
- The input level of the audio signal is too low. Turn up the volume of the
audio source equipment.