User's Manual

P. 8
4. Turn on the speaker and adjust the volume to the desired listening level.
B) Whenever you find frequency jam, move your channel switch from
one channel to the other channel (there are two channels for
selection) on the transmitter, and then press the “SCAN” auto-tuning
button on the speaker again.
6. The BASS BOOST button can be used to enhance the bass sound
depending on your own music preferences. Turn bass/boost effect ON
simply by pressing the button down, and pressing it once again to OFF.
5. Push the “SCAN” auto-tuning button to get the best tuning reception in
the speakers. When the button is pressed, frequency tuning starts
automatically and it stops when a signal is detected. The POWER /
STEREO LED will change from red to green.
NOTE :
You should now be able to place the speakers freely from room to room
without disruption. If disruption should occur (signal breaks up), press the
speaker’s “SCAN” auto-tuning button to maximize best reception.
A). Keep a distance of the speaker up to 7 meters apart from transmitter, and
then press “SCAN” auto-tuning button for best tuning reception.
If you hear interference from other components, switch the channel control
P. 7