Owner's Manual

8
Switching off
1. Turn the VOLUME ON/OFF knob until the click sound is heard to turn off the speaker and the
LED light goes off
2. For protection of the transmitter and power saving, the transmitter will cut off automatically if there
is no/weak operation input signal from audio source for 4 minutes.
In other words, if the signal comes back, the transmitter will work again automatically.
TROUBLE SHOOTING
NO SOUND
- Ensure the AC adaptor is fully inserted into the AC outlet and the power connection input on
the transmitter.
- Ensure the speaker is switch ON.
- Speaker’s battery capacity is too low, replace with new batteries or connect the AC
adaptors to the speakers.
- Ensure the TV or audio component is ON.
- The connected audio / video equipment is not playing. Start playing the equipment.
- The volume of speaker is too low, adjust the volume to an appropriate level.
DISTORTED
- Press the “SCAN” button on the speakers until matching the frequency of the transmitter.
- Change the position of the channel selector on the transmitter. You must then press the
SCAN button on the speaker.
- Battery capacity is too low. Replace with the new battery.
- Ensure the volume level of speakers is adjusted properly.
- The speaker is too far from transmitter, move closer.
- The input level of the audio signal is too low. Turn up the volume of the audio source
equipment.