User's Manual

P. 7
6. The BASS BOOST button can be used to enhance the bass sound
depending on your own music
preferences. Turn bass/boost effect ON
simply by pressing the button down, and
pressing it once again to OFF.
P. 8
NOTE :
You should now be able to place the speakers freely from room to room
without disruption. If disruption should occur (signal breaks up), press the
speaker’s “SCAN” auto-tuning button to maximize best reception.
If you hear interference from other components, switch the channel control
of transmitter, and then move the speakers to other free location. You can
re-adjust the tuning control by moving it either channel 1 or 2 of the
transmitter, then pressing “SCAN” auto-tuning button for best reception.
When transmitting / receiving over long distances, the signal from the
system will become weaker.
SWITCHNG OFF
1. Turn the VOLUME ON/OFF knob
until the click sound is heard to turn
off the speaker and the LED light
goes off
2. For protection of the transmitter
and power saving, the transmitter will cut off automatically if there is
no/weak operation input signal from audio source for 4 minutes.
In other words, if the signal comes back, the transmitter will work
again automatically.