User's Manual

P.5
b) Whenever you find frequency jam, move your channel switch from one
channel to the other channel (there are two channels for selection) on the
transmitter, and then press the “AUTO TUNE” button again.
5. You should now be able to place the speakers freely from room to room without
disruption. Should there is any disruption (signal cuts off or carries distortion),
press the speaker’s “AUTO TUNE” button to maximize the best reception.
If you hear interference from other components, switch on the channel control of
transmitter, and then move the speakers to other free location. You can re-adjust
the tuning control by moving it either channel 1 or 2 of the transmitter, then pressing
“AUTO TUNE” button for best reception.
When transmitting / receiving over long distances, the signal from the system will
become weaker.