User's Manual

P.4
2. Press POWER button and turn the speakers ON. The POWER LED will light
up in blue. Switch off the speakers by pressing the POWER button on the
speaker, and the LED will be off.
OPERATION
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The green LED on the transmitter will light up.
2. Select the channel 1 or 2 of the transmitter for best performance in your
location.
3. Press the “POWER” button on the speaker to turn on the speaker. Press the
“AUTO TUNE” button to get the best tuning reception in the speakers. When
the button is pressed, frequency tuning starts automatically and it stops when a
signal is detected.
4. Volume can be adjusted up by
pressing “+” button or down by
pressing the button “-“ to the desired
listening level.
NOTE :
a). Keep a distance of the speaker up
to 7 meters apart from the
transmitter, and then press “AUTO
TUNE” button for the best
reception.