User's Manual

Storing and Selecting FM presets
To store FM presets:
1. In Direct mode, tune to the station you want to store.
2. Slide open the front cover
3. Press Save, then press the number key under which you want to store the
current radio frequency
4. To Add / Change a preset simply repeat steps 1 - 3
Note: You can store up to 10 preset FM radio stations.
To Select a Preset FM radio station:
1. Slide open the front cover
2. Press Mode until "Preset" appears on the display
3. Press the Number key which represents the Preset FM radio station you wish to
tune in to
Note: If the Preset is already displayed, you only need to press a number key to
tune to another preset.
Listening to Scanner
To listen to the Race Scanner:
1. Slide the Top switch to RACE
2. Use the Tune Up and Down arrow keys to tune/scan to different frequencies
- In Preset mode, the Tune Up/Down keys will tune to stored presets
- In Direct mode, the Tune Up/Down keys will scan to the next active frequency
NOTE: To change the mode between Preset and Direct, press the mode key.
The ProScan 100 can tune RACE channels by keying in the seven digit frequency
To direct dial Race channels:
1. Slide the Top switch to RACE
2. Slide open the front cover
3. Press Mode until "Direct" appears on the display
4. Enter the 7-digit frequency (ex.4-5-0-2-5-7-5 for 450.2575 MHz.)
Storing and Selecting Race presets
To store Race presets:
1. In Direct mode, tune to the frequency you want to store
2. Slide open the front cover
3. Press Save, then press any 3 digit number from 000-199 under which you want
to store the current channel and the press Save again
4. To Add / Change a preset simply repeat steps 1 - 3
Note: You can store up to 100 Race presets.
Note: A great way to use the Race presets, is to use the driver's car number as the
preset number. (example 024, 008, etc.)
To Select a ProScan100 preset:
1. Slide open the front cover
2. Press Mode until "Preset" appears on the display
3. Press the 3 digit number which represents the race frequency preset you wish
to tune in to
Note: When in Preset mode and the front cover is closed, presets are available
through the Tune Up and the Tune Down keys.
Deleting presets
To delete Race presets one at a time:
1. Press and hold Mode for 2 seconds "DELETE?" will appear in the display
2. Use the keypad to enter the preset number to be deleted
3. Press Save to confirm your entry
Note: Pressing mode again will cancel the operation.
Deleting ALL presets
To delete all Race presets:
1. Press and hold Mode for 2 seconds. "DELETE?" will appear in the display
2. Press the Tune Down arrow key, "DEL ALL" will appear in the display
3. Press Save to confirm the deletion of all stored presets
Note: Pressing mode again will cancel the operation.
Note: Once Save has been pressed, the stored preset will be permanently deleted.
Reset Factory Defaults
To Reset factory defaults:
1. Press and hold Mode for 2 seconds. "DELETE?" will appear in the display
2. Press the Tune Down arrow key until "RESET?" appears in the display
3. Press Save to confirm the return to factory defaults
Note: Pressing mode again will cancel the operation.
Note: Resetting factory defaults will delete all presets and restore the default preset
set at the factory.
Accessing History and the Home Key
To access channel history:
1. Close the front cover
2. Press the back button (1) to back up through the last 10 accessed channels
3. Press the next button (3) to advance forward through those same frequencies
Note: The ProScan100 keeps track of the last 10 accessed channels in both Race
and FM modes, using the back and next keys allow you to quickly scan to the last
10 accessed channels.
The Home key
To access the Home key (2) one touch hot key "preset":
1. Close the front cover
2. Press Home (2), and the ProScan100 returns to the predefined Home channel
Note: The ProScan100 stores a 'home' frequency for both Race and FM modes.
Changing the predefined Home key channel:
1. Slide the switch to either Race or FM depending on the Home key (2) frequency
you wish to change.
1. Tune in the channel you wish to assign to the Home key (2)
2. Make sure the cover is closed
3. Press and hold the Home key (2) for 2 seconds
Specifications
Channels of Operation: 1600
Number of Presets: 100
UHF Sensitivity: 0.18uV typical @10dB (S+N)/N
UHF Selectivity:
-6dB ± 6 kHz
-50dB ± 13 kHz
UHF Scan Speed: 50 ch/sec
IF Frequencies
1st IF: 21.4 MHz
2nd IF: 450 kHz
Squelch Sensitivity: 0.25uV
Antenna Impedance: 50 ohms
Audio Output Power (10% THD): 150 mW
Current Drain (squelched): 65mA
Specifications are typical; individual units might vary. Specifications are subject
to change and improvement without notice.