User Manual

INSTALLATION
TRANSMITTER
1. Connect the Power Adapter to the DC IN input Socket located on the
transmitter rear panel.
2. Connect the Power Adapter provided to an Electrical Outlet.
3. An Audio Connection Cable with 3.5 mm Jack Plug is provided, to connect the
Transmitter to the Audio Devices (e.g. TV set, Hi-Fi system, DVD, MP3 or
iPod).
4. When necessary, use the RCA Adapter Cable for connection to the Audio
Output Right (R) and Left (L) of the Hi-Fi or TV Set.
The Red Power Indicator LED in Transmitter will light up when the Power Adapter
is connected to the Electrical Outlet. Then connect Audio Device with Audio Cable
to Transmitter and make sure the Audio Device is switched ON, the Green
Charge/Transmit Indicator LED will turn on.
RF Transmission will automatically switch OFF in about 4 minutes if no Audio
Signal is detected. However, Transmitter will be automatically switched ON once
audio signal is detected.
RECEIVER HEADPHONES
1. Remove the Ear Cushion Holder on Right Hand Side (R) of Headphone
Receiver. 2 Battery Compartments can be found.
2. Insert the provided 2 pieces of Rechargeable AAA Size Batteries (provided in
the packaging of the product) into the Battery Compartments with correct
polarity.
3. Close the Battery Compartments by restoring the Ear Cushion Holder.