User Manual

CHARGING THE BATTERIES
1. Select the On/Off Switch in the
Headset Receiver to OFF position.
2. Place the Headphone Receiver on
the Transmitter, make sure the Charge
Contact touches the Charge Pins on the
Transmitter.
3. The Charging process starts automatically.
LED Indicator of Main Battery then glows in
Red constantly. It will glows in Green about 2 hours
after the battery is fully charged.
4. A spare battery is provided for sustained enjoyment.
Simply insert it into the Transmitter for Charging.
LED Indicator of Spare Battery will then glow in
Red constantly. It will glows in Green about 2 hours
after it is fully charged.
WARNING:
Never attempt to recharge conventional dry cells.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such
as sunshine, fire or the like
Never use another type of battery or non-rechargeable batteries to replace the
rechargeable batteries supplied.
When the headphones are not in use, move the switch to the OFF position to avoid
damaging the batteries.
The batteries must always be fully charged before first use. An initial 3 hours charge is
required to guarantee an acceptable service life for the rechargeable batteries. Always
ensure that the Headphone Receiver is switched to OFF position while the batteries are
charging.
Excessive sound pressure from earphones and headphones can cause hearing loss.
IMPORTANT:
This unit should be operated with rechargeable batteries only. When replacing the batteries
or when disposing of the unit, always comply with applicable laws relating to the disposal of
batteries. Please place them in a proper disposal container to ensure that they are
eliminated safely and in an environmentally friendly way.