User Manual

6. This Headphone can be used as a regular Wired Headphone by connecting your Audio Source
with the Line-In Cable to the Headphone Jack shown below.
IMPORTANT
1. Switching Off
a) For protection of the Transmitter and power saving, the Transmitter will be switched to
Stand-by Mode automatically if there is no Audio Signal for approximately 5 minutes, LED
will be OFF. If the Audio Signal returns, the Transmitter will be automatically switched On
with LED glows in BLUE. Switch on the Headphone again to listen the music.
b) The Headphone will be switched Off automatically if there is no signal from the Transmitter
for about 5 minutes.
2. Make sure the Headphone is turned OFF when charging is in process.
3. Use only the included Rechargeable AAA Batteries. When the Headphone is not in use, turn the
Headphone OFF.
4. To ensure a long service life, fully charge the Batteries before using the Headphone for the first
time. According to the Capacity of the Rechargeable Battery included, the Battery charging
process will take approximately 5 hours.
This device must be used with the AC/DC adaptor supplied in the package.