User Manual

OPERATION
1. Turn on the speaker by pressing the POWER button once, LED Indicator then blinks in Blue
slowly.
2. Switch on the Bluetooth Source Device (e.g. Mobile Phone) to which the Speaker is paired up.
Play Music from the Bluetooth Source Device, and adjust Master Volume to Middle.
3. Music should be heard from the Speaker, adjust the Volume from the Speaker to desired level by
pressing and .
4. If the Volume Intensity from the Speaker is too weak, adjust the Master Volume from the Bluetooth
Source Device accordingly.
5. To switch off the Speaker, simply press the Power button once again.
NOTE : Low or distorted sound on speakers can be caused by batteries that are discharged or have low
capacity. Test by recharging the internal batteries, by connecting the Power Adapter to the Speaker.
TROUBLE SHOOTING
No Sound
 Ensure the Power Adaptor is fully inserted into the Electrical Wall Outlet
 Ensure the speaker system and Bluetooth device has been paired up.
 Ensure the speaker system is switched ON.
 Ensure the Bluetooth Source Device is ON.
 The connected audio / video equipment is not playing. Start playing the equipment.
 The volume of speaker system is too low, adjust the volume to an appropriate level.
Distorted
 Ensure the volume level of speaker is adjusted properly.
 The speaker system is too far away from the Bluetooth device, move them closer.
TECHNICAL SPECIFICATIONS
Transmission Mode : Bluetooth® V2.1 + EDR
Carrier Frequency : 2.402~2.480GHz
Operation Voltage : Speaker, DC 15V 1.0A Power Adaptor
Frequency Response : 50Hz – 12KHz
Distortion : < 3%
S/N Ratio : 70dB
Operation Distance :
Up to 10 meters (open area)
Output Power : 10W