User Manual

COMPONENT IDENTIFICATION
INSTALLATION
1. Plug the provided Power Adaptor into the DC jack of the Speaker.
2. Connect the Power Adaptor to an Electrical Wall Outlet.
BLUETOOTH PAIRING
1. Turn on the speaker by pressing the POWER button once, LED Indicator then blinks in Blue
slowly.
2. When pairing the system to Bluetooth Source Device (e.g. Mobile Phone), press and hold the
PAIR button for at least 3 seconds, LED Indicator then blinks in Blue swiftly. Select the system
name “AU Bluetooth Speaker” that shows on the pairing list of your Bluetooth Source Device.
Default Pairing Code is “ 0000 “.
3. When the Speaker and Bluetooth Source Device are successfully paired up, the LED Indicator
then glows steadily in Blue.