User Manual

BLUETOOTH PAIRING
1. Remove the door of the battery compartment. Insert 6 pieces of ‘AA’ size ALKALINE batteries
into the battery compartment with correct polarity under the speakers, then replace the door of
battery compartment, or connect the provided AC/DC 9V Adaptor to the DC input jack under the
speakers, then plug it to the wall AC outlet.
2. Turn on the speaker system by pressing the POWER button, Indicator Bar then glows in Blue.
3. When pairing the system to Bluetooth Source Device (e.g. Mobile Phone), press Pairing button
once, Indicator Bar then blinks in Blue. Select the system name “AU Bluetooth Speaker” that
shows on the pairing list. Default Pairing Code is “ 0000 “.
4. When the Speaker and Bluetooth Source Device are successfully paired up, the Indicator Bar
then glows steadily in Blue.
OPERATION
1. Switch on the Speaker by Pressing the Power Button once, Indicator Bar then glows in Blue.
2. Switch on the Bluetooth Source Device (e.g. Mobile Phone) to which the Speaker is paired up.
Play Music from the Bluetooth Source Device, and adjust Master Volume to Middle.
3. Music should be heard from the Speaker, adjust the Volume from the Speaker to desired level
by pressing
and .
4. If the Volume Intensity from the Speaker is too weak, adjust the Master Volume from the
Bluetooth Source Device accordingly.
5. To switch off the Speaker, simply press the Power button once again.
DIRECT LINE-IN
1. This Speaker System, at the same time, can also work as a conventional Wired Stereo Speaker
with Direct Line-In to your Panel TV. or other Audio Devices. Simply by connecting the 3.5mm
Audio Cables from the rear of the Speaker System to your Music Source.
2. When the Circuit inside the Speaker detects the Signal from Direct Line-In, the Indicator Bar
then glows steadily in Green.