User's Manual

OPERATING GUIDE

This section elaborates how to pair up the Dongle and headset for use with audio devices,

pairing the headset with your computer for audio streaming/VoIP/HCI, and pairing the headset

with your Cellphone for audio streaming/handfree.

A. Connecting The Dongle to Audio Device via 3.5mm Audio Plug

1. Set the Power switch on the headset to ON to turn on the headset. The Charging LED

(red) will flash slowly.

2. Set the Mode Selection switch on the Dongle to AUDIO

, and the Pairing LED

(blue) will flash slowly.

3. Press the “SET” button on the Dongle and “PAIR” button on the headset for 5 seconds

until the Pairing LED (blue) on both devices start flash alternative and quickly.

4. Once both devices were linked, the Pairing LED (blue) on both devices will start to flash

slowly.

5. Connect the Dongle to your audio device with 3.5mm audio plug, and start enjoys the

music.

Note: Initial Pairing is needed to pair up both Bluetooth® headset and Dongle for the first time.

There is no need to pair a previously paired system again, as they will pair up automatically for

future use.

B. Connecting the Dongle to Computer via USB Connector

(a) Audio Streaming:

1. Set the Power switch on the headset to ON to turn on the headset. The Charging LED

(red) will flash slowly.

2. Set the Mode Selection switch on the Dongle to USB

, and then connect the

Dongle to your computer USB port via the USB connector. The Pairing LED (blue) will

flash slowly.

3. Press the “SET” button on the Dongle and “PAIR” button on the headset for 5 seconds

until the Pairing LED (blue) on both devices start to flash quickly.

4. Once both devices were linked, the Pairing LED (red) will starts to flash slowly.

5. Plays the music with your computer and you can start enjoy the music with the headset.

(b) VoIP Mode for Internet Telephony:

1. If you want to pick up an Internet call (such as Skype, YM, and etc), press the “SET”

button on the Dongle (Refer to SET Button Configuration) to switch to VoIP mode.

2. Press the Call button on the headset to pick up the incoming call, and the music will