BELL Equipment CORTISONE MODEL: BE-900FADS HANDS FREE CORDLESS HEADSET TELEPHONE Installation and Operation Guide Please read this manual carefully prior ta installing your telephone.
TABLE OF CONTENTS Important Safety Instructions. Battery Cautionary Instructions... Control Diagrams... Features. installation Operation... Preparing for use. Placing calls... Receiving calls Ending calls... Transferring call Care And Maintenance. Security System... Recharging the Battery Pac! 18 Replacing the Battery Pack... 0 Maintenance Problem Solving. ce ean 22 Warnings. FCC Requirements.
i IMPORTANT SAFETY INSTRUCTIONS When using your telephones equipment, safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. D6 not use liquid cleaners, of aerosol cleaners. Use a damp cloth for cleaning. If necessary, use a mild soap.
BATTERY CAUTIONARY INSTRUCTIONS CAUTION: To Reduce the Risk of Fire or Injury to Persons, Read and Follow these instruction: 1 Use any the following type and size of battery pack: 3.6V. BOGYMAN, Ni-MG Battery Pack: GPIGPSOAAAHIBML. 5 Do not dispose of the battery in a fire, The cell may explode. Check with local codes for possible special disposal instructions. 5. Donor pan or mutate the battery. Released electrolyte is corrosive and may cause damage to the eyes of skin. it may be toxic it swallowed.
CONTROL DIAGRAMS continued Charge (CHARGE/IN USE] LED Indicator : Lights up to indicate the HEADSET in the IN USE mode. {indicator blinks when the HEADSET is being charge by the BASE UNIT. BA EMO (MEMORY) Button : Used to store 10 phone numbers {up to 16 digits each) or dial any of the stored phone numbers in the 10 memory locations. TONE Button : Used to temporarily change ihe dialing mode trim Pulse to Tone when dialing in the Pulse mode.
CONTROL DIAGRAMS continued Talk Button : Press to answer an incoming call or to place a call Crass to end a call. RE/PA (REDIAL/PAUSE) Button : Press ta redial the last number dialed (up to 32 digits) from the HEADSET. Also used lo generate a "pause" in the dialing sequence while storing numbers in memory {for use in PA BX or long distance services). Channel Scan Button (SCAN): Press to change the operating channel when you hear interference.
FEATURES The BE-OFFLOADS cordless headset telephone is designed to provide you the convenience of high quality, portable telephone communication. The BE-900FADS telephones comes in two parts, a headstand a base. The headset allows you to make or receive calls away from its base. The headset keeps your hands free, permitting youth do other things while you talk. The base's space saving, upright design makes idealizations where space is limited.
INSTALLATION Connecting Your Crane 1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase. 2. Check to be sure you have a HEADSET, BASE UNIT, Antenna, AC Adapter, Telephone Line Cord, Battery Pack and Owner's Manual. 110v , AC { ADAPTER : TELEPHONE BASE UNIT LINE CORD ER EASE fools 3.
INSTALLATION continued Plug the AC adapter into a 120V AC wall outlet. & unsent one plug of the TELEPHONE LINE CORD info the house TELEPHONE JACK and the other end into tha telephone jack on the back of the BASE UNIT. ({f you have an older 4-prong telephone jack, you will need an RJ-11C TELEPHONE JACK ADAPTER, This adapter is available at the same place you purchased your telephone.) 6. Raise or reposition the antenna on the BASE UNIT for the best reception. 7.
OPERATION Preparing for Use 1 Place the HEADSET on the BASE UNIT for 12 hours. 2 After 12 hours, remove the HEADSET from the BASE UNIT. Placing a Call sing the HEADSET: 1. Press the TALK button on the HEADSET. The IN BATHHOUSE LOW LED indicator and the BASE UNIT CHEN USE LED will fight up, 2. Listen for a dial tone 3. Dial the phone number Using the BASE UNIT, Brass the SEK] button on the BASE UNIT. The INTROSPECT LED indicator will int up 1. 2. Austen for a dial tone. 3.
OPERATION continued Ending a Cal Using tha HEADSET, Since the unit features "Auto-Standby, rectum the HEADSET fo the BASE UNIT or press the TALK] button if you are away from the BASE UNIT. Last Number Redial if you get a busy signal, use the Redial function to automatically dial the las! phone number dialed (up to 32 digits). Regal Usi 1. Lift the HEADSET and press the TALK button. 2. Listen for a dial tone. 3.
OPERATION continued Channel Selection Channel Scan {Auto scan) ff you are reeving a call or dialing out and TALK Js pressed, the unit auto scans for the best channel available. Chanson 7s (Mi 3} the existing channel becomes noisy or starts having interference, press thd SCAN button oo the HEADSET. The unit will automatically scan for the best channel available. NOTE: It takes about 2 seconds for the unit to scan ta the next channel. intercom Function titivating the b ing th £ UNIT 1. Press on the BASE UNIT.
OPERATION continued 3. If the BASE UNIT user does not want to access the telephone call while in the intercom mode, press bellybutton on the BASE UNIT to return the phone call to the HEADSET user or the HEAD SET user can press the(TALK button to return to the call If the BASE UNIT user wants to access the telephone call while In the intercom mode, press Thespis button. A three-way conversation is established.
OPERATION continued tiring Telephone Numbers into the HEADSET or BASE UNIT Memory Press the memo{ MEMO button on either the HEADSET or BASE UNIT. 2. Dial the telephone umber you want to store {maximum of 16 digits) on either the HEADSET or BASE UNIT keypad. Press the MENU button again. Press a memory location where you wan! fo store the phone number (1 to 9) for HEADSET and {0 to 8) for BASE UNIT. You will hear one confirmation neap.
: : CARE AND MAINTENANCE Security System Your cordless telephone uses a digital security coding system fo prevent unauthorized use of your telephone fine by another nearby cordless telephone. The system has its awn identifying signal created by homier. pewters in both BASE UNIT and HEADSET. Security Code “This telephone has an internal security code with 85,538 possible combinations. Each time you pick up the HEADSET, the code is randomly set to a new combination.
CARE AND MAINTENANCE continued Recharging the Battery Pack Battery Type Use the following type and size battery pack: 3 3.6V, BOOMER Ni-MG Battery Pack: GP| GPE0AAAH3BML Ni-MG Recharging the Battery Pack “The pickerel metal hydroxide (Ni-MG) battery pack in the HEADSET can be recharged many times using the builtin charger in the BASE UNIT, When the battery pack is low, a “beep” sound will be heard every 12 seconds and the IN BATHHOUSE LOW LED indicator will blink rapidly.
CARE AND MAINTENANCE continued Replacing the Battery Pack Changing the Battery Pack The battery pack provides power for the HEADSET of your cordless telephone. To Replace the Battery Pack: Remaps the HEADSET battery compartment cover by sliding it down. Pull out the battery connector and remove the battery pack. Plug the view battery pack into the battery connector. Tide the HEADSET battery compartment cover firefly into place in its closed position Before use, charge the new battery pack for 12 hours.
CARE AND MAINTENANCE continued Maintenance Instructions Your cordless headset telephone has been designed to give years of ruble free electromagnetically service. To assure its longevity, please read the following maintenance instructions. 1 Esp your telephone away from heat as high temperatures can shorten the fife of the electrical components and distort or melt its plastic parts. Keep your telephone free of dust and moisture. If it gets wet, wipe it dry immediately .
PROBLEM SOLVING Problem Solving Section Far your assistance, we have listed below a few common problems, phone does not work, check the following: 1. BASE UNIT is plugged into power source. 2. HEADSET is charged. 3. TONE PULSE SWITCH is in the right position 4. LINE CORD is plugged in the jack. age of phone limited, check the following: . ANTENNA on BASE UNIT is raised or re positioned BASE UNIT is centrally located in your residence.
WARNINGS IMPORTANT In order to get maximum life from the HEADSET battery pack, be sure to charge the HEADSET for 12 hours before initial use. Placing your BASE UNIT near appliances such as televisions, refrigerators, radios, or microwave ovens may cause interference. When you hear interference, press the SCAN button to change the operating channel. The AC ADAPTER must always be plugged into an electrical outlet.
FCC REQUIREMENTS EQUIPMENT NOTES This equipment is registered with the Federal Communications Commission and is in compliance with Part 68 of the FCC Rules and Regulations. On the bottom of this equipment is a label indicating among other information, the FCT Registration Number and Ringer Equivalence Number (REN) for this equipment. Upon request, you must provide this information to your telephone company.
FCC REQUIREMENTS continued INTERFERENCE INFORMATION This equipment generates and uses and can radiate low level radio frequency energy. [has been tested an found to comply with the limits for a Class B digital device in accordance with the specifications in Part 1 of the FOC Hulas, which are designed to provide reasonable protection against such interference in a residential installation.
3 : Astray Telecommute Limited Warranty Easter savants that the BE-Q00FADS sold by Astray within the continental mis of ihe United States, Hawaii and Alaska, are free from defects in materials snd workmanship under normal use and service for 1 year.
