User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety
- 1 Important safety directions
- 2 Electrical safety
- 3 Mechanical safety
- 4 Explosion safety
- 5 Fire safety
- 6 Electrostatic discharge (ESD)
- 7 Electromagnetic Compatibility (EMC)
- 8 Modality specific safety
- 9 Network safety, security and privacy
- 10 Toxic or hazardous substances and elements
- 11 Equipment label overview
- 3 Using the Base Station
- 4 Using DoseView
- 5 Using the PDM
- 6 Using the Cradle
- 7 Maintenance
- 8 Troubleshooting
- 9 Product disposal
- 10 Technical data
The Walk-Up View also consists of the Personal Dose Overview (see
section “Personal Dose Overview” on page 3-8), which is the default Walk-
Up view. It has two sub views:
•
the Annual Personal Dose view (see section “Annual Personal Dose” on
page 3-9)
• the Personal Dose History view (see section “Personal Dose History” on
page 3-10)
Personal Dose Overview
Figure 3.4 The Personal Dose Overview view
When you enter the Walk-Up View you will see the following information:
•
The Accumulated Personal Dose since January 1st of the current year, or
since last reset. This value is also shown as a percentage of the yearly max
dose.
• Access to the Annual Personal Dose sub view (1), see section “Annual
Personal Dose” on page 3-9.
• Dose Session 1 and 2 values, date and time. Use the Dose Sessions to
measure dose for specific time spans, for example a specific procedure or a
working day. The value shows the accumulated dose for a session since
3.3 Base Station features
3-8
Using the Base Station
DoseAware Base Station Package Document version 1.2
P h i l i p s H e a l t h c a r e 9 8 9 6 0 0 2 1 6 6 2 3 0 9 0 0 a 4 4 7 8 0 0 4 5 a 3 a
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60