Quick Start Guide

22-Dec-2020 Initial draft 1.0

BLUETOOTH EARBUDS SIMPLE PAIRING

1. Follow the right direction to put the earbuds into the left and right position of the

charging case, and closed the cover.

2. Open the top cover and press the button of the charging case for 3 seconds.

3. Took out the earbuds from the charging case and put the earbuds into the ears according

to the position of L (left ear) and R (right ear).

4. Open the Bluetooth setting on your smartphone and searching for the Bluetooth device of

「SYN3」.

5. Select「SYN3」and connected.

6. Hearing the voice prompt of pairing success、connected from earbuds, if connected

correctly.

PS: Please follow repeat step1 to step5, if connecting fail. The pairing list of the earbuds

can storage 8 devices maximum.

CLEANING DEVICE LIST

1. Place both earbuds in the charging case, and close the top cover.

2. Open the Bluetooth setting on your smartphone and select 「Forget This Device」.

3. Open the charging case, then press the button and hold for 10 seconds.

HOW TO WEAR

Please put the earbuds into the ear according to the position of L (left ear) and R (right ear)

and rotate the earbuds to the vertical direction and adjust it to a comfortable position.

PRIMARY & SECONDARY EARBUDS SWITCHING

The earbuds will display「SYN3」on your Bluetooth device when it was pairing. The

secondary Earbud will replace with the primary Earbud automatically when the primary

Earbud’s battery is too low and auto power off or disconnected.

The secondary Earbud will repeat the step as mentioned above when

your earbuds connected and put the primary Earbud into the charging

case. The primary Earbud would continue and not influenced by the

secondary Earbud if you put the secondary Earbud into the charging case.