User's Manual

[Unex] - Ver. 1.13- 20170307 spec. P. 2

» More than +20dBm Class C RF spectrum mask compliant with margins at MMCX antenna port.

» Superior fading sensitivity in the typical ETSI deﬁned C2C multipath scenarios increases wireless

coverage.

» Internal 40MHz BW ﬁlter provides immunity to out-of-band radio interferences in multi-channel

operation.

» Dual DSRC PHY supports concurrent dual channel operation.

» Dedicated oscillator provides high frequency accuracy at ± 6.0ppm in –40ºC ~ +85ºC temperature

range.

» Dynamic and accurate power control in a wide 4.5dBm ~ 25dBm output range provides superior

performance stability.

» Integrated RF ESD protectors on antenna ports provide robust surge protection.

» High ESD protection design ensures immunity and robustness of all ports in ESD events. (IEC 61000-

4-2 Level 4, Contact ±8kV, Air ±15kV)

» 4-corner UV cured resin for BGA chips ensures vibrational and environmental reliability.

Performance:

» System on module design of Autotalks® Craton 3-CPU core communication processor, Pluton RF

transceiver, 128MB DDR3, and 32MB NOR enables V2X software applications on internal system, no

external CPU required.

» Automotive-grade -40ºC ~ +85ºC components and 50-pin header design secure environmental

reliability.

» Wide DC power input range from 6V ~ 40Vprovides application ﬂexibility.

» Power management support of Idle, ON, and OFF state.



Subsystem:

» 50-pin header design provides feature rich I/O to meet connectivity requirement of V2X system

integration.

» Two on-board MMCX DIP antenna connectors provide robust RF performance up to 6GHz.

» Optional off-the-shelf hardware and software modules enable V2X OBU, V2X RSU, V2X Sensor

Fusion ECU applications.

Flexibility:

1. PCB-201: GNSS/HSM carrier board for VTX-201

2. HVP-201: i.MX 6/Cellular/GNSS/HSM main board for VTX-201

3. VPS-201x: V2X protocol stack license

4. VAS-201x: V2X application service

5. VVT-201x: diagnostic ﬁrmware in ﬁeld deployment