User's Manual

④ The blue lamp of Pairing Button 1 is completely will be on, once pairing is complete.
⑤ To connect the second headset just follow the above steps but, use Pairing Button 2.
※ Warning
The first time you use the headset, you will need to pair it with the device you intend to use the
headset with. Pairing creates a link between the headset and the connected device. Once done, you
should not have to repair with the same device again. It also works for exterminating the interruption
and sets up the security. After that, UD-3000TV is in perfect working order. But if you paired your
headset to other devices but UD-3000TV, you should pair it again.
5. Auto Connection
Once done the first pairing, you should not have to repair with the same device again. But the headset
should not be paired with other devices. And the power of headset and UD-3000TV should be ON.
(1) If the Power of Headset is OFF
① You should turn on the headset.
(Refer the manual of your headset to turn it on)
② Pairing will be automatically done after a while.
③ In this case you should not have to press the pairing button.
※ if you press the pairing button, you should pairing it again.
(2) If the Power of UD-3000TV is OFF
① To Power On the UD-3000TV, connecting the adapter to the power port of UD-3000TV
② Pairing will be automatically done after a while.
※ if you press the pairing button, you should pairing it again.
6. Frequently Asked Questions and Troubleshooting
⊙ Unavailable to hear any audio through the headset.
- Check to make sure that the headset is powered on.
- Make sure that the devices are properly paired and connected to each other.
⊙ The devices can not be automatically paired.
- Make sure the power of headset and UD-3000TV is ON.
- Check whether or not the headset is paired with other devices.
If it is, disconnect the headset with other devices.
⊙ Getting a noise or lip-sync.
- Make sure that the battery of headset is enough. If not please recharge it.
- If the battery is fully charged, please pairing it again.