User manual

User Manual of IR Speed Dome

Note: The Chroma Suppress function is supported by certain camera model series.

 Saturation

Saturation indicates the brightness of the color. The higher the saturation, the brighter the color is.

Note: The saturation function is supported by certain camera model series.

 Contrast

Contrast is the degree of difference between the darker and lighter parts of the image.

Note: The contrast function is supported by certain camera model series.

 HLC

Set the HLC to ON can brighten the darker area and weaken the highlight area of the image.

Note: The HLC function is supported by certain camera model series.

 HR Mode

Set the HR MODE as ON to adjust the resolution higher. Switch it OFF to disable the function, which

can avoid cross color of the image.

3.3.2 Configuring Privacy Mask

Purpose:

Privacy mask enables you to cover certain areas on the live video from being live viewed and

recorded. The masked areas can move with the panning/tilting movements and automatically adjust

the size as the lens zooming in/out.

Steps:

1. Move the cursor to enter the privacy mask configuration submenu:

MAIN MENUS > DOME SETUP > PRIVACY SETUP

PRIVACY BLANK

BLANK NUM 1

BLANK STATUS OFF

SET BLANK

DELE BLANK

BACK EXIT

Figure 3-9 Privacy Mask Configuration Menu

2. Choose the privacy mask number:

Steps:

(1) Move the cursor to BLANK NUM and click IRIS+ to enter the editing mode.

(2) Click the up and down direction buttons to select a mask number for configuration.

(3) Click IRIS+ again to confirm and exit the editing mode.

Note: The configurable privacy mask number varies according to the camera models.

3. Configure the position and size of the privacy mask.

Steps:



/R&DOO



ZZZFFWYLUHODQGLH



VKRS#FFWYLUHODQGLH