User guide

Camera Menu
5-17
3 Select the Add Sequence button. Figure 5-10 the Add Sequence Screen will appear.
Figure 5-10 Add Sequence Screen
4 Enter a Sequence Name in the text box.
5 Select a preset from the Preset Name drop-down menu.
6 Enter a Dwell Time in seconds in the text box. The values range from 5 to 600 seconds.
7 Select the Add button. The preset is now listed as part of the sequence.
8 Repeat steps 5 and 6 to add further presets to the sequence.
Note
Up to 16 presets can be added to a sequence.
9 Once you have finished, use the Apply or Refresh button at the bottom of the page to either
save or cancel the settings.
The sequence will now appear on the Select Sequence and Delete Sequence drop-down
menus.
Procedure 5-19 Editing a Sequence
1 Select Sequences from the Camera menu. Figure 5-9 the Sequences Name screen will be
displayed.