User guide

Live Viewing Menu
4-39
The default setting is ‘automid’.
Note
If EIS is enabled autolow and automid will be unavailable.
Note
If AGC/Shutter Setting is set to openshutter autohigh will be unavailable.
North Position
Direction Indicators permit you to understand the approximate pointing position of the dome to an
established reference point. This reference point is called “North” and may correspond to magnetic
north (if it is known) or some other landmark or fixture. When the dome is initially installed, “North”
defaults to a pre-defined position (0° pan/tilt). You may program the “North” position to be any point
along the dome's pan axis.
Procedure 4-47 Set North Position
1 Follow Procedure 3-5 Starting the Live Web Video feed.
2 Select Camera Adjust from the Live Viewing menu.
3 Select North Position from the Camera Adjust menu. Figure 4-41 the North Position section
will be displayed.
Figure 4-41 North Position