User guide

Live Viewing Menu
4-36 Configuration and User Guide
3 Disable the White Balance function by selecting the check box, Figure 4-39 the Red and Blue
balance section will be displayed.
Note
When Automatic White Balance is first switched from disabled to enabled, the red and blue
values displayed are based on the current feedback from the camera.
Figure 4-39 Red and Blue balance
4 Use the slider to change the Red and Blue balance. The slider bar can be moved left or right
using the mouse or for fine adjustments using the left and right arrow keys on the PC keyboard.
The red and blue values range from 0 to 511.
Infra Red Features
Note
Infra Red features are only available on 35X camera domes.
IR Mode
When the camera is in B/W mode, sensitivity and focusing can be improved using IR Illumination.
Optimize the camera block by matching the lighting to get a sharper IP picture. Table 4-3 —
Corresponding IR Switching with IR Illumination at 850nM below is an example of what will happen
with the incorrect illumination.