User guide

Live Viewing Menu
4-33
2 Select De-Interlacing from the Camera Adjust menu. Figure 4-36 the De-Interlacing section
will be displayed.
Figure 4-36 De-Interlacing section
3 Select the De-Interlacing check box to enable or disable the De-Interlacing function. The
default setting is enabled.
Note
It is recommended that de-interlacing should always be enabled on the IP Dome.
Automatic White Balance
White balance is normally compensated for by the automatic white balance gain control. In some
lighting conditions, you may need to adjust the red and blue settings manually for optimal viewing.
When Automatic White Balance is enabled, the red and blue setting values are based on feedback
from the camera. When Automatic White Balance is disabled, the camera uses the red and blue
setting values to control the white balance. When Automatic White Balance is first switched from
On to Off, the red and blue values displayed are based on the current feedback from the camera.
The red and blue values range from 1 to 511.
Note
Auto White Balance must be set to Off to modify the Red and Blue settings manually.
Figure 4-37 illustrates the relationship of the red and blue settings to the white balance.