User guide

Live Viewing Menu
4-15
Follow Procedure 5-6 Display Current Home Position to change the return time for the home
position.
Procedure 4-28 Using a Sequence as a Home Position
1 Select Scans/Sequences from the Live Viewing menu.
2 Choose Select Sequence from the Scans/Sequences menu. Figure 4-17 the Select Sequence
section will be displayed.
3 Select a sequence from the drop-down menu.
4 Select the Use as Home button to set the selected sequence as the camera home position.
Procedure 4-29 Delete a Sequence
1 Select Scans/Sequences from the Live Viewing menu.
2 Select Delete Sequence from the Scans/Sequences menu button. Figure 4-18 the Delete
Sequence section will be displayed.
Figure 4-18 Delete Sequence
3 Select a pre-defined sequence from the drop-down menu.
Note
You cannot delete a sequence while it is associated with another camera function. To remove
the sequence refer to the associated camera function,
Clear the Current Home Position,
Configuring Alarm Actions and Editing a Scheduled Task.
4 Select the Delete button. You will be prompted to confirm the deletion. Select the OK button to
confirm or the Cancel button to stop the deletion.
Procedure 4-30 Add Sequence
1 Select Scans/Sequences from the Live Viewing menu.