User guide

Live Viewing Menu
4-12 Configuration and User Guide
Scans/Sequences
The following section provides information on configuring Scans and Sequences for the IP Dome.
Scans
A scan allows you to program left and right scan limits to automate your surveillance activities.
Once these scan limits are programmed you can choose to run a smooth scan, stepped scan, or
random scan. When active, the scan repeats until interrupted by a camera command, preset,
pattern or alarm.
Procedure 4-24 Setting Scan Limits
1 Select Scans/Sequences from the Live Viewing menu.
2 Select Scan Limits from the Scans/Sequences menu. Figure 4-8 the Scan Limits section will
be displayed.
Figure 4-15 Scan Limits section
3 Click the dome icon on the Live Web Video pane and use the camera controls to locate the left
scan limit. See
Procedure 3-7 Controlling the camera via the Live Web Video pane for further
details. Select the Set Left button to set the displayed position as the left limit.
4 Use the camera controls to locate the right scan limit. See Procedure 3-7 Controlling the
camera via the Live Web Video pane for further details. Select the Set Right button to set the
displayed position as the right limit.
5 Follow Procedure 4-25 Activating a Scan. The Live Web Video pane will run the scan within the
selected scan limits.
Procedure 4-25 Activating a Scan
1 Follow Procedure 4-24 Setting Scan Limits before starting a scan.
2 Select Scans/Sequences from the Live Viewing menu.