User guide

Live Viewing Menu
4-7
Patterns
A pattern is a series of pan, tilt, zoom and focus movements which can be saved to the dome. A
maximum of 16 patterns can be programmed for the IP Dome each containing up to 97 steps with
an unlimited duration.
Procedure 4-20 Adding a Pattern
Note
This procedure is the recommended method for adding a new pattern, however It is also possible
to add a pattern using the camera overlay control, refer to
Procedure 3-11 Add a Pattern via the
Camera Control Overlay.
1 Follow Procedure 3-5 Starting the Live Web Video feed.
Click the dome icon, use the camera overlay controls to locate the pattern starting point. See
Procedure 3-7 Controlling the camera via the Live Web Video pane and Procedure 3-8
Controlling Pan and Tilt via a mouse using the Live Web Video pane for further details.
2 Select Patterns from the Live Viewing menu.
3 Select Add Pattern from the Patterns menu. Figure 4-10 the Add Pattern screen will be
displayed.
Figure 4-10 Add Pattern screen