User guide

Web Configuration
3-9
Controlling the Pan-Tilt Control via Mouse
Controlling the camera using the mouse will allow you to move slowly which will provide maximum
accuracy.
Procedure 3-8 Controlling Pan and Tilt via a mouse using the Live Web Video pane
1 Follow Procedure 3-5 Starting the Live Web Video feed.
2 Select Dome Control in the live web Video pane. The camera control overlay will be
displayed.
3 Move the cursor over the center of the video pane. The Cursor Origin Mark appears as
shown in Figure 3-5.
Figure 3-5 Live image with Cursor Origin Mark and Direction cursor displayed
4 Click and drag the cursor to set the direction and speed, then release.
• The camera’s movement speed increases proportionally with the arrow’s distance from the
cursor origin mark.
• The camera’s direction is relative to cursor origin mark.
5 Select Exit to close the camera control overlay.
Zoom via Mouse Scroll Wheel
Controlling the zoom function using the mouse
Procedure 3-9 Zooming via the mouse scroll wheel using the Live Web Video pane
1 Follow Procedure 3-5 Starting the Live Web Video feed.
2 Use Procedure 3-7 Controlling the camera via the Live Web Video pane or/and Procedure 3-8
Controlling Pan and Tilt via a mouse using the Live Web Video pane to locate the area you
would like to zoom.
3 Point the camera at a target.
4 Scroll the mouse wheel upwards (zoom in) and downwards (zoom out).