User guide

Installation
2-2 Configuration and User Guide
Installation Process
Using a computer which is connected to the
Internet, go to the Apple website
(www.apple.com) and download the Bonjour
for Windows discovery tool from http://
www.apple.com/downloads/macosx/apple/
windows/bonjourforwindows.html.
Follow the directions provided by the
installation file to install Bonjour for Windows
on the computer that will be used to configure
the IP Dome.
Open Microsoft Internet Explorer. To open the
Bonjour toolbar click on the Bonjour icon.
Alternatively you may also enable Bonjour by
selecting View > Explorer Bar > Bonjour. The
Bonjour toolbar will be displayed. The Bonjour
toolbar will list all IP devices found on the
network. The IP Dome is identified as ‘Product
Code - MAC Address’, for example
‘ADVEIPSD22N-00:30:46:01:05:AA'
Refer to the Web Configuration chapter in the Configuration
and User guide for details on how to log in to the IP Dome
and modify the IP Dome configuration.
Remove the camera and make note of the serial number and MAC
address located on the side of the box or base of the camera.
Ensure that the IP Dome is connected to the computer or network
which will be used for the configuration and power on.
The camera will begin its initial boot up sequence which will take
approximately 1 to 2 minutes.
The IP Dome will be assigned a Static IP
address of 192.168.0.80
DHCP Server found and IP
Address allocated?
Double click the required IP Dome from
Bonjour toolbar list to open the Web
Configuration Sign In page.
The camera will automatically be assigned
a Network IP address.
Are you using a proprietary
Network Video Recorder (NVR) to
configure the IP Dome?
Select the IP
Dome.
Open Microsoft Internet Explorer and enter the
URL of the IP Dome as https://192.168.0.80
NOTE: The computer being used to configure
the IP Dome must have an IP address on the
same subnet.
NOTE: Bonjour can also be used to discover
the IP Dome on a static network. Refer to the
Configuration and User guide for more
detailed information.
NOTE: We recommend that the the cameras
IP Address is changed so that conflicts can be
avoided when using the same Static IP
Address.
The IP Dome will perform three attempts to obtain an IP Address from
the DHCP Server.
NO
NO
Refer to the NVR manual for
information on how to locate
the IP Dome on the network.
NOTE: The NVR being used to
configure the IP Dome must
have an IP address on the
same subnet.
View the DHCP Server
system logs and make
note of the IP address
assigned to the IP
Dome.
Do you have access to the
DHCP Server Logs?
NO
Open Microsoft Internet
Explorer and enter the
URL of the IP Dome as
shown in the DHCP
Server logs.
YES NO
Are you using a proprietary
Network Video Recorder (NVR) to
configure the IP Dome?
YES YES
YES