User guide

Information Menu
7-7
Current Faults
When Current Faults is selected from the Information menu. Figure 7-32 the Current Faults screen
will be displayed.
Figure 7-32 Current Faults screen with no faults displayed
The Fault Table will display information on any faults that your camera is currently experiencing.
• No - details the fault index.
• Fault - a description of the fault.
• Created On - the time and date when the fault occurred.
• Component - internal software component that raised the fault either DIOM (Digital Input Output
Monitor) or ENVM (Environmental Monitor).
• Severity - indicates how serious the fault is. The following are supported, in increasing order of
severity, Clear, Warning, Critical and Error.
• Additional Information - extra information that supplements the fault description.
• Delete -remove the fault from the fault table.
If any faults have been found the View Fault Table will update and display the faults as shown in
Figure 7-33
Figure 7-33 Faults displayed in the View Fault Table