User guide

7-1
Information Menu
In this section information can be obtained on the camera, the configured settings, its physical
state and any faults that have been found. It is also possible to change your password.
Model
When Information is selected. Figure 7-27 the Model Information screen will be displayed.
Figure 7-27 Model Information screen
Here you can find information on the following:
• Camera Name - as defined by Procedure 6-51 Setting the Camera Name
• Firmware Version - software/firmware version number
• Unit Model - factory programmed unit model
• Unit Serial Number - factory programmed serial number
• Unit Manufacture Date - factory programmed manufactured date
• Camera Model - denotes camera zoom model, either 22 or 35
• Video Standard - either PAL or NTSC
• MAC Address - factory default MAC Address
• Interface Name - name of ethernet interface
• Speed - speed of ethernet interface.
• Duplex - communication mode of ethernet interface