User guide

Networking Menu
6-21
• _ntlx-video._tcp
Procedure 6-54 Enable or Disable Bonjour
Allows IP Dome to be located on the network using Bonjour.
1 Select Advanced from the Networking menu.
2 In the Bonjour section use the check box to enable or disable the Bonjour function. The default
setting is enabled.
Note
It is recommended to keep Bonjour enabled.
3 Once you have chosen your settings, to save the changes select the Apply button or to cancel
the changes select the Refresh button at the bottom of the page.
Procedure 6-55 Enable or Disable SSH Secure Shell
Enables Secure Shell access into the IP Dome, if remote access is permitted by the camera
network, to enable Level 3 Technical Support to diagnose any problems on the IP Dome.
1 Select Advanced from the Networking menu.
2 In the SSH Secure Shell section use the check box to enable or disable the SSH Enable
function. The default setting is disabled.
Note
It is recommended to keep SSH Enable disabled. You should only enable this function when it
is requested by Level 3 Technical Support.
3 Once you have chosen your settings, to save the changes select the Apply button or to cancel
the changes select the Refresh button at the bottom of the page.