User guide

Networking Menu
6-19
4 The VideoEdge
®
banner will update to display the camera friendly name as seen in Figure 6-
26.
Figure 6-26 Camera Friendly Name displayed in VideoEdge
®
banner
Bandwidth Throttling
Set the bandwidth throttling for the IP Dome. Refer to Bandwidth Throttling for more information.
Procedure 6-52 Set Bandwidth Throttling
1 Select Advanced from the Networking menu.
2 Use the check box to enable or disable the bandwidth throttling function. The default setting is
disabled.
3 If bandwidth throttling has been enabled enter a bandwidth cap in the text box in kilobytes per
second. It must be numeric and within the range of 100 to 12500.
4 Once you have chosen your settings, to save the changes select the Apply button or to cancel
the changes select the Refresh button at the bottom of the page.
Procedure 6-53 Set Session Timeout
Specifies the number of minutes that a web session can remain idle before it is automatically
terminated.
1 Select Advanced from the Networking menu.
2 In the Session Timeout section use the slider to select the number of minutes. The slider bar
can be moved left or right using the mouse or for fine adjustments using the left and right arrow
keys on the PC keyboard. The values range from 0 to 240. The default setting is 5 minutes.
3 Once you have chosen your settings, to save the changes select the Apply button or to cancel
the changes select the Refresh button at the bottom of the page.
Bonjour
Bonjour is the preferred discovery method of the camera and the only method supported natively
by the IP Dome.
Bonjour, enables automatic discovery of computers, devices, and services on IP networks.
Bonjour uses industry standard IP protocols to allow devices to discover each other automatically,
without the need to enter IP addresses or configure DNS servers. In order to provide a true zero-
configuration experience, Bonjour requires that devices implement three essential things. These
devices must be able to:
• Allocate IP addresses without a DHCP server
• Translate between names and addresses without a DNS server
• Locate or advertise services without using a directory server.
When started, the Bonjour discovery server will broadcast device information across the network
at regular intervals. In addition on shutdown the camera will announce the camera's removal from
the network to any interested Bonjour clients.
By default the camera will make the following information available to discovery clients: