User guide

Networking Menu
6-17
6 Follow Procedure 3-4 Logging in to the IP Dome to confirm that the camera has been restored
to the factory default settings.
Procedure 6-50 Reboot the Camera
Will perform a reboot of the camera.
1 Select Maintenance from the Networking menu.
2 In the Administrative Options section select the Reboot button. You will be prompted to confirm
that you would like to reboot the camera.
3 Select the OK button to confirm the reboot or select the Cancel button to stop the reboot.
4 If the OK button is selected, the camera will begin the reboot procedure.
Wait for the camera to complete its initial boot up sequence which will take approximately 1 to 2
minutes. Upon completion of the initial boot up sequence the camera will be horizontal (0°).
5 Follow Procedure 3-4 Logging in to the IP Dome to confirm that the camera has been returned
to the factory default settings.