User guide

Networking Menu
6-12 Configuration and User Guide
Firewall
Configure the Basic Filtering and Address Filtering for the Firewall.
When Firewall is selected from the Networking menu. Figure 6-22 the Firewall screen will be
displayed.
Figure 6-22 Firewall Settings screen
Firewall
Set the Basic Filtering and Address Filtering for the Firewall here.
Procedure 6-42 Configuring Basic Filtering
1 Select Firewall from the Networking menu.
2 Select the ICMP Blocking check box to enable or disable this function. The default setting is
disabled.
3 Select the RP Filtering check box to enable or disable this function. The default setting is
enabled.
4 Select the SYN Cookie verification check box to enable or disable this function. The default
setting is disabled.
5 Once you have chosen your settings, to save the changes select the Apply button or to cancel
the changes select the Refresh button at the bottom of the page.
Procedure 6-43 Address Filtering
1 Select Firewall from the Networking menu.