User guide

Networking Menu
6-10 Configuration and User Guide
FTP Settings
Configure the FTP settings for the FTP server in this section.
When FTP Settings is selected from the Networking menu. Figure 6-17 the FTP Settings screen
will be displayed.
Figure 6-21 FTP Settings screen
FTP Settings
Set the Remote Settings and Authentication for the FTP Server.
Note
FTP must be configured to enable FTP alerts when using alarms.
Procedure 6-40 Configuring Remote Settings and Authentication
1 Select FTP Settings from the Networking menu.
2 Enter the FTP Server IP number in the text box.
3 Enter the Port in the text box. The default setting is 21.
4 For Use authentication to log on to server, select the check box to enable or disable this
function. The default setting is disabled.
If authentication is required a Username and Password text box will be displayed, enter the
details to authenticate the server.
5 Once you have chosen your settings, to save the changes select the Apply button or to cancel
the changes select the Refresh button at the bottom of the page.
Procedure 6-41 Testing FTP Settings
1 Select FTP Settings from the Networking menu.
2 In the FTP Test section select the Test button.
A test text file will be sent to the FTP Server address specified in the FTP Settings containing
the following information.
Camera Name:
IP Address:
Mac Address: