User guide

Networking Menu
6-8 Configuration and User Guide
SMTP Settings
Configure the SMTP settings to send e-mail alerts in this section.
When SMTP Settings is selected from the Networking menu. Figure 6-20 the SMTP Settings
screen will be displayed.
Figure 6-20 SMTP Settings screen
Email Settings
Set up the mail server which will be used when sending details of triggered alarms.
Note
SMTP must be configured to enable email alerts when using alarms.
Procedure 6-38 Configuring the Email Settings
1 Select SMTP Settings from the Networking menu.
2 In the Email Settings section enter the IP address of the mail server in the text box.
3 Enter the Server Port number in the text box.
4 Enter From Address in the text box.
5 Enter the Send Email To email address in the text box.
6 Select the check box to enable or disable the Use authentication to log on to server.
If authentication is required a Username and Password text box will be displayed, enter the
details to authenticate the server.
7 Once you have chosen your settings, to save the changes select the Apply button or to cancel
the changes select the Refresh button at the bottom of the page.