Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
71
 Upload event-triggered snapshots to FTP
Steps:
1) Configure the FTP settings and check in FTP Settings page. Please
refer to Section 6.3.8 Configuring FTP Settings for more details.
2) Check in Motion Detection Settings or Alarm Input config
pages. Please refer to Step 3 Set the Alarm Actions Taken for Motion Detection in
Section 6.6.1 Configuring Motion Detection, or Step 4 Configuring External Alarm
Input in Section 6.6.1 Configuring Motion Detection.
3) Check Enable Event-triggered Snapshot.
Snapshot Settings