Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual

Record Schedule

5. Select the day to set the record schedule.

(1) Set all-day record or segment record:

 If you want to configure all-day recording, please check All Day checkbox.

 If you want to record in different time slots, check the Customize checkbox.

Set the Start Time and End Time.

The time of each segment can’t be overlapped. Up to 4 segments can be

configured.

(2) Select a Record Type. The record type can be Normal, Motion Detection,

Alarm, Motion | Alarm, Motion & Alarm.

 Normal

If you select Normal, the video will be recorded automatically according to

the time of the schedule.

 Record Triggered by Motion Detection

If you select Motion Detection, the video will be recorded when the motion

is detected.

Please refer to the Step 1 Set the Motion Detection Area in the Section 6.6.1

Configuring Motion Detection.

 Record Triggered by Alarm

If you select Alarm, the video will be recorded when the alarm is triggered

via the external alarm input channels.

Please refer to Section 6.6.4 Configuring External Alarm Input.

 Record Triggered by Motion & Alarm

If you select Motion & Alarm, the video will be recorded when the motion

is detected and alarm are triggered at the same time.

Please configure the settings on the Motion Detection and Alarm Input

Settings interfaces. Please refer to Section 6.6.1 and Section 6.6.4 for