Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual

2. Initialize the added network disk.

(1) Enter the HDD Settings interface (Advanced Configuration > Storage > Storage

Management), in which you can view the capacity, free space, status, type and

property of the disk.

(2) If the status of the disk is Uninitialized as shown in Figure 7-3, check the disk

and click to start initializing the disk.

Initialize Disk

Initializing

When the initialization completed, the status of disk will become Normal as

shown in Figure 7-5.

View Disk Status

 Up to 8 NAS disks can be connected to the speed dome.

 To initialize and use the SD card after inserting it to the speed dome, please refer to the

steps of NAS disk initialization.

7.2 Configuring Recording Schedule

Purpose:

There are two recording settings for the speed domes: manual recording and

scheduled recording. For the manual recording, refer to Section 4.4 Recording and

Capturing Pictures Manually. In this section, you can follow the instructions to

configure the scheduled recording. By default, the record files of scheduled recording

are stored on the SD card (if supported) or in the network disk.

Steps: