Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
66
Chapter 7 Record Settings
Before you start:
To configure the record settings, please make sure that you have a network storage
device within the network or a Micro SD card inserted into your speed dome.
7.1 Configuring NAS Settings
Before you start:
The network disk should be available within the network and properly configured to
store the recorded files, log files, etc.
Steps:
1. Add the network disk
(1) Enter the NAS (Network-Attached Storage) Settings interface:
Configuration > Advanced Configuration > Storage > NAS
(2) Select the NAS type as NFS or SMB/CIFS. If you select SMB/CIFS, you need to
enter the User Name and Password.
Select NAS Type
(3) Enter the IP address of the network disk. The default NFS storage format of file
path is /dvr/test, and the default SMB/CIFS storage format of file path is /test.
Add Network Disk
The network disk file path name share is user-defined while creating the DVR
network storage. Please refer to the User Manual of the NAS for creating the file path.
(4) Click to add the network disk.
After saving the settings successfully, you will need to reboot the speed dome to
activate the settings.