Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual

FTP server.

You need a FTP server and set FTP parameters first. Refer to Section 6.3.8

Configuring FTP Settings for setting FTP parameters.

 Trigger Channel

Record a video when an event occurs.

You have to set up the recording schedule for this function. Please refer to

Section 7.2 Configuring Recording Schedule for setting up the recording schedule.

 Trigger Alarm Output

Trigger one or more external alarm outputs when an event occurs.

To trigger an alarm output when an event occurs, please refer to Section 6.6.5

Configuring Alarm Output to set the alarm output parameters.

6.6.2 Configuring Video Tampering Alarm

Purpose:

You can configure the speed dome to trigger an alarm action when the lens is covered.

Steps:

1. Enter the video tampering Settings config page:

Configuration > Advanced Configuration > Events > Video Tampering

Tampering Alarm

2. Check Enable Video Tampering checkbox to enable the tampering detection.