Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
63
Arming Time Schedule
3. Set the Alarm Actions for Motion Detection.
You can specify the linkage method when an event occurs. The following contents
explain how to configure the different types of linkage method.
Linkage Method
Check the checkbox to select the linkage method. Notify surveillance center,
send email, upload to FTP, trigger channel and trigger alarm output are
selectable.
 Notify Surveillance Center
Send an exception or alarm signal to remote management software when an
event occurs.
 Send Email
Send an email with alarm information to a user or users when an event occurs.
To send the Email when an event occurs, please refer to Section 6.3.10
Configuring Email Settings / Email parameters.
 Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a