Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual

You can set Zoom Limit value to limit the maximum value of zooming. The value can

be set to 20, 40, 80, 160 and 320.

 Local Output

You can select the output mode to ON or OFF.

This function varies depending on the models of speed dome.

6.5.2 Configuring OSD Settings

Purpose:

The speed dome supports following on screen displays:

Zoom: Displays the amount of magnification.

Direction: Displays panning and tilting direction, with the format of PXXX TXXX. The

XXX following P indicates the degrees in pan direction, while the XXX following T

indicates the degrees in tilt position.

Time: Supports for time display.

Preset Title: Identifies the preset being called.

Camera Name: Identifies the name of speed dome.

You can customize the on screen display of time.

Steps:

1. Enter the OSD Settings config page:

Configuration > Advanced Configuration > Image > OSD Settings

OSD Settings

2. Check the corresponding checkbox to select the display of speed dome name, date

or week if required.

3. Edit the speed dome name in the text field of Camera Name.

4. Select from the drop-down list to set the time format, date format and display

mode.

5. You can use the mouse to click and drag the text to adjust the OSD position.

6. Click to activate the above settings.