Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
56
Focus Settings
 Focus Mode
The Focus Mode can be set to Auto, Manual, Semi-auto.
 Auto:
The speed dome focuses automatically all the time.
 Semi-auto:
The speed dome focuses automatically once after panning, tilting and zooming.
 Manual:
In Manual mode, you need to use on the control panel to focus
manually.
 Min. Focus Distance
This function is used to limit the minimum focus distance. The value can be set to 1.5m,
3m, 6m, 10cm and 50cm.
The minimum focus value varies depending on the models of speed dome.
Day/Night Switch
 Day/Night Switch
The Day/Night Switch mode can be set to Auto, Day and Night.
 Auto:
In Auto mode, the day mode and night mode will switch automatically according
to the light condition of the environment. The switching sensitivity can be set to
Low, Normal, High.
 Day:
In Day mode, the speed dome displays color image. It is used for normal lighting
conditions.
 Night:
In Night mode, the image is black and white. Night mode can increase the
sensitivity in low light conditions.
 IR Light Mode
IR light mode can be set to Auto and Manual.
 Auto:
The brightness of the infrared light will be adjusted automatically. IR Light
Sensitivity value ranges from 0 to 100. Trigger Mode can be set to Camera or
Photosensitive.
 Manual:
You need to adjust the brightness value of infrared light manually. IR Light Bright
value ranges from 0 to 100.