Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
52
when there is movement in the video stream, as it maintains image quality
throughout.
Max. Bitrate:
Set the max. bitrate to 32~12288Kbps. The higher value corresponds to the higher
video quality, but the higher bandwidth is required.
Video Encoding:
The Video Encoding standard can be set to H.264 or MJPEG.
I Frame Interval:
Set the I-Frame interval from 2 to 250.
SVC:
SVC(Scalable video coding technology) is for storing video when the bandwidth is
limited. To use this function, a specified H.264 encoding storage device is necessary.
4. Click to save the settings.
6.4.2 Configuring Audio Settings
Steps:
1. Enter the Audio Settings interface
Configuration > Basic Configuration > Video / Audio > Audio
Or Configuration > Advanced Configuration > Video / Audio > Audio
Audio Settings
2. Configure the following settings.
Audio Encoding: G.711ulaw, G.711alaw, MP2L2 and G.726 selectable.
Audio Input: If an intercom is connected to the speed dome, you need to set this
option to LineIn. When a microphone is connected to the speed dome, you need
to set this option to MicIn.
Input Volume: Slid the bar to turn up/down the volume. The value ranges from 0
to 100.
3. Click to save the settings.