Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual

TCP/IP Settings

2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6) Subnet

Mask and IPv4(IPv6) Default Gateway.

3. Click to save the above settings.

 If a DHCP server is available, you can check to automatically obtain an IP address

and other network settings from that server.

 The valid value range of Maximum Transmission Unit(MTU) is 500 ~ 1500. The default value

is 1500.

 Multicast sends a stream to the multicast group address and allows multiple clients to

acquire the stream at the same time by requesting a copy from the multicast group address.

Before utilizing this function, you have to enable the Multicast function on your router and

configure the gateway of the network speed dome.

 If a DNS server settings are required for some applications (e.g., sending email), you should

properly configure the Preferred DNS Server and Alternate DNS server.