Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual

Time Sync Manually

(3) Click to save the settings.

You can also check Sync with local time checkbox to synchronize the time with the

time on your computer.

 Select the Time Zone

From the Time Zone drop-down menu as shown in Figure 6-4, select the Time Zone

in which the speed dome is located.

Time Zone Settings

 Configuring Daylight Saving Time (summer time)

Steps:

(1) Enter the DST config menu by Configuration > Advanced Configuration >

System > DST

(2) Check Enable DST to enable the DST function.

(3) Set the date of the DST period.

(4) Click to save the settings.

6.3 Configuring Network Settings

6.3.1 Configuring TCP/IP Settings

Purpose:

TCP/IP settings must be configured correctly before you operate the speed dome over

a network. IPv4 and IPv6 are both supported.

Steps:

1. Enter TCP/IP Settings interface:

Configuration > Basic Configuration > Network > TCP/IP

Or Configuration > Advanced Configuration > Network > TCP/IP