Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
37
Time Settings
 Configuring Time Synchronization by NTP Server
Steps:
(1) Check the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between synchronizing. This can be set from 1 to
10080 minutes.
If the speed dome is connected to a public network, you should use a NTP server that
has time synchronization function, for example the National Time Center (IP Address:
210.72.145.44). If the speed dome is set in a local network, NTP software can be used to
establish as an NTP server for time synchronization.
 Configuring Time Synchronization Manually
Steps:
(1) Check Manual Time Sync.
(2) Click on Set Time text field to get the pop-up calendar.