Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
35
Chapter 6 Speed Dome Configuration
6.1 Configuring Local Parameters
Local configuration refers to the parameters of live view and operations when using
the web browser.
Steps:
1. Enter the Local Configuration interface:
Configuration > Local Configuration
Local Configuration Interface
2. Configure the following settings:
 Live View Parameters: Set the protocol type, stream type, image size and live view
performance.
 Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.
 Live View Performance: Set the live view performance to Shortest Delay,
Balanced or Best Fluency.
Please set Live View Performance to Best Fluency for high frame rates.
 Rules: To enable or disable dynamic analysis for motion detection.
 Image Format: The captured images can be saved in different formats. JPEG
and BMP are available.
 Record File Settings: Set the saving path for recorded video files.
 Record File Size: Select the max file size for manually recorded and downloaded
video files. This size can be set to 256M, 512M or 1G.
 Save record files to: Set the saving path for manually recorded video files.